Issue 17, 2021

A biobased, bioactive, low CO2 impact coating for soil improvers

Abstract

Lignosulfonate-based bioactive coatings as soil improvers for lawns were developed using laccase as a biocatalyst. Incorporation of glycerol, xylitol and sorbitol as plasticizers considerably reduced the brittleness of the synthesized coatings of marine carbonate granules while thermal enzyme inactivation at 100 °C enabled the production of stable coatings. Heat inactivation produced stable coatings with a molecular weight of 2000 kDa and a viscosity of 4.5 × 10−3 Pas. The desired plasticity for the spray coating of soil improver granules was achieved by the addition of 2.7% of xylitol. Agriculture beneficial microorganisms (four different Bacillus species) were integrated into the coatings. The stable coatings protected the marine calcium carbonate granules, maintained the viability of the microorganisms and showed no toxic effects on the germination and growth of model plants including corn, wheat, salad, and tomato despite a slight delay in germination. Moreover, the coatings reduced the dust formation of soil improvers by 70%. CO2 emission analysis showed potential for the reduction of up to 3.4 kg CO2-eq. kg−1 product, making it a viable alternative to fossil-based coatings.

Graphical abstract: A biobased, bioactive, low CO2 impact coating for soil improvers

Supplementary files

Article information

Article type
Paper
Submitted
23 Jun 2021
Accepted
19 Jul 2021
First published
09 Aug 2021
This article is Open Access
Creative Commons BY-NC license

Green Chem., 2021,23, 6501-6514

A biobased, bioactive, low CO2 impact coating for soil improvers

R. Weiß, S. Gritsch, G. Brader, B. Nikolic, M. Spiller, J. Santolin, H. K. Weber, N. Schwaiger, S. Pluchon, K. Dietel, G. Gübitz and G. Nyanhongo, Green Chem., 2021, 23, 6501 DOI: 10.1039/D1GC02221K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements